A3 Quattro V6-3.2L (BUB) (2008)
/Page-580002.png)
-
When installing, identify the wires on the threaded connectors.
-
Release the retaining clips - 2 - and move the wiring harness - 1 - to the side - arrow -.
-
Remove the nuts - 3 through 7 - and disconnect the wires from the retainers.
-
Remove the screw - arrow -.
-
Remove the relay and fuse holder B (SB) from the engine compartment E-box.
Installing
Install in reverse order of removal, observing the following:
-
Mount the relay and fuse holder B (SB) on the engine compartment E-box. Tighten the central bolt; when doing so the connectors will be pushed
up.
-
Connect and tighten the wires according to the markings on the engine compartment E-box main fuse holder.
