A3 Quattro V6-3.2L (BUB) (2008)
Wheel Bearing: Procedures
Wheel Bearing Housing and Wheel Bearing Unit Assembly Overview
Wheel Bearing Housing and Wheel Bearing Unit Assembly Overview
1 - Suspension Strut
2 - Tie rod end
3 - Socket head bolt
^
Tapered end of bolt must point in direction of travel
4 - Hex socket head bolt, 8 Nm
^
M6 x 16
5 - Left Front ABS Wheel Speed Sensor G47 / Right Front ABS Wheel Speed Sensor G45
^
Can be tested in "Guided Fault Finding" using Vehicle Diagnosis, Testing and Information system VAS 5051B
^
Before inserting sensor, clean inner surface of fitting hole and coat with grease G 000 650
6 - Cover plate
7 - Hex nut 20 Nm plus an additional 90 degree turn
^
Self-locking
^
Always replace after removal
8 - Hex bolt 12 Nm
^
M6 x 10