A3 Quattro V6-3.2L (BUB) (2008)
-
Remove the nuts - 1 - and - 2 -.
-
Remove the engine compartment E-box - 3 - upward.
-
If equipped, remove the 2-pin relay carrier - 2 - under the engine compartment E-box - 1 - - arrow -.
NOTE: The exact assignment of the engine compartment E-box can be found in the applicable wiring diagram.
Installing
Install in reverse order of removal, observing the following:
-
Install the relay and fuse holder B SB. See Relay and Fuse Holder B .
-
Connect battery. Required actions .
Tightening Specifications
Component
Nm
Left engine compartment E-box to body
9 Nm