A3 Quattro V6-3.2L (BUB) (2008)
Information Bus: Removal and Replacement
Data Bus On Board Diagnostic Interface
Data Bus On Board Diagnostic Interface
Removing
-
If the control module was replaced, select the "Replace" function for the respective control module in "Guided Fault Finding" or " Guided
Functions".
-
Select the function or path:
-
Follow further instructions on display of (VAS 5051B).
-
Switch off ignition and remove ignition key.
-
Remove driver storage compartment => Body Interior
68 Removal and Installation.
-
Remove the screw - arrow - and then remove the air guide - 1 -.
-
Release retaining clips - 1 - and - 6 - by pressing them together - arrows -.