A3 Quattro V6-3.2L (BUB) (2008)
Air Injection Pump Relay: Service and Repair
Secondary Air Injection Pump Relay
Removing
-
If equipped, remove vacuum hose - 2 - to air guide hose.
-
Disconnect air guide hose - 1 - at Throttle Valve Control Module J338.
-
Disconnect Mass Air Flow (MAF) Sensor G70 electrical connector - item 3 -.
-
Remove upper section of air filter housing - arrows -.
-
Remove filter element.
-
Pull off air guide cover - 1 -, disengage clips sideways to do so.
-
Unclip air duct - 2 -.
-
Remove lower section of air filter housing - arrows -.
Vehicles with relay carrier, old version: