A3 Quattro V6-3.2L (BUB) (2008)
/Page-1241002.png)
-
Disengage electrical harness connector - 2 - and lay it aside.
CAUTION!
The fuel level sensor 2 (G169) may only be removed when fuel tank is maximum 1/3 full. Otherwise, a large amount of fuel will spill out.
-
Remove locking ring with Wrench (T10202).
-
Carefully pull Fuel Level Sensor 2 (G169) - 2 - and suction jet pump - 1 - partially out of fuel tank opening.
-
Remove seal.
