A3 Quattro V6-3.2L (BUB) (2008)
Headlamp Alignment Control Module: Service and Repair
HID Headlamp Control Module
HID Headlamp Control Module
CAUTION:
Danger to life due to high voltage.
-
Usage and safety information for gas discharge headlamps.
Removing
-
With ignition switched off, disconnect ground cable at battery:
-
Battery in engine compartment.
-
Battery in luggage compartment.
-
Remove headlamp.
-
Remove screws - arrows -.
-
Remove the HID headlamp control module from the headlamp housing.
Installing
Install in reverse order of removal, noting the following:
-
Check seal between High-intensity Gas Discharge Lamp Control Module and headlamp housing.
-
Install headlamp.
-
Connect battery. Actions to be taken:
-
Battery in engine compartment.
-
Battery in luggage compartment.
Tightening Specifications
Component
Nm
Gas discharge bulb control module to headlamp
1.5 Nm