A3 Quattro V6-3.2L (BUB) (2008)
Power Door Lock Switch: Service and Repair
Front Central Locking Switch
Front Central Locking Switch
Special tools, testers and auxiliary items required
‹› Trim removal wedge (3409)
Removing
-
Switch off ignition and remove ignition key.
-
Carefully pry the cover - 1 - with the trim removal wedge (3409) out of the retaining clips - arrow -.
-
Release the retaining clips - arrows - and carefully pull the central locking switch - 1 - out of the driver door trim.
-
Unplug connector.
Installing
Install in reverse order of removal, noting the following:
-
Press central locking switch into switch mount until catches engage.