A3 Quattro V6-3.2L (BUB) (2008)
Fuel Level Sensor: Testing and Inspection
Fuel Level Sensor 2 (AWD), Checking
Fuel Level Sensor 2, Checking (AWD)
Special tools, testers and auxiliary items required
-
Hand-held multimeter V.A.G 1526C
-
Connector test set V.A.G 1594C
Test Sequence
-
Remove rear seat bench
-
Unclip retainers - arrows - of cover for left sealing flange.
-
Disconnect electrical harness connector - 1 - at locking flange.
NOTE: Ignore - 2 -.
Vehicles through approximately 11/2004:
NOTE: On vehicles with 2-wire technology, the connector for Fuel Level Sensor 2 G169 is equipped with 2 terminals.
-
Connect multimeter between terminal - 1 - and - 2 - for resistance measurement.
Fuel Level Sensor 2 G169 installed:
-
Sensor at lower stop: 265 to 291 Ohms.