A3 Quattro V6-3.2L (BUB) (2008)
Power Distribution Module: Service and Repair
Vehicle Electrical System Control Module
Removing
Observe notes on contact corrosion => [ Contact Corrosion ] See: Wiring Harness/Service Precautions/Vehicle Damage Warnings.
-
If the control module was replaced, select the "Replace" function for the respective control module in "Guided Fault Finding" or " Guided
Functions".
-
Select the function or path:
-
Follow further instructions on display of (VAS 5051B).
-
Switch off ignition and remove ignition key.
-
Remove driver storage compartment.
-
Release retaining springs - arrows - and remove Vehicle Electrical System Control Module (J519) - item 1 - down from base mount - 2 -.
‹› Shown with connectors removed in illustration.
-
Press the connector clips - 1 - and - 2 - in - direction of arrow -.