audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

BUB and CBRA Engine|Page 5221 > < BUB and CBRA Engine|Page 5219
Page 1
background image

Starter Motor: Service and Repair
CCTA or CBFA Engine w/ Manual Transmission

Starter

Observe notes on contact corrosion => [ Contact Corrosion ] See: Battery/Service Precautions/Vehicle Damage Warnings. 

Removing

-

Remove the air guide by releasing the side retainers - arrows  -.

-

Unclip the lower air guide by releasing the left and right retainers -  arrow A -.

-

Disengage the lower air guide - 2 - at the mounts -  3 - by moving the lower air guide slightly to the rear.

-

Disconnect the air guide pipe - 1 - from the lower air guide - arrow B -.

-

Disconnect the mass air flow (MAF) sensor (G70 ) electrical connector - 1 -.

BUB and CBRA Engine|Page 5221 > < BUB and CBRA Engine|Page 5219