A3 Quattro V6-3.2L (BUB) (2008)
Steering Control Module: Service and Repair
Servomotor with Control Module
Special tools, testers and auxiliary items required
‹› Torque Wrench (VAG 1331)
‹› Torque Wrench (VAG 1332)
‹› Bracket (VW 540/2)
‹› Thrust Piece (3253/6) qty. 2
Removing
-
Remove steering gear. Refer to => [ Electromechanical Steering Gear ] See: Steering Gear/Service and Repair/Removal and
Replacement/Electromechanical Steering Gear.
-
Clean steering gear in area of servo motor with control module.
-
Clamp steering gear as illustrated.
1. Bracket VW 540/2
2. Thrust Piece 3253/6 (quantity: 2)
-
Rotate steering into the straight position.
-
Remove hydraulic thrust piece. Refer to => [ Hydraulic Thrust Piece ] See: Steering Gear/Service and Repair/Removal and
Replacement/Hydraulic Thrust Piece.
-
Disconnect connector from control module.