A3 Quattro V6-3.2L (BUB) (2008)
Steering Angle Sensor: Service and Repair
Steering Pinion with Steering Angle Sensor
Steering Pinion with Steering Angle Sensor
Special tools, testers and auxiliary items required
‹› Torque Wrench (VAG 1331)
Removing
-
Remove steering gear. Refer to => [ Electromechanical Steering Gear ] See: Steering/Steering Gear/Service and Repair/Removal and
Replacement/Electromechanical Steering Gear.
-
Clean the steering gear in the steering pinion area and install the plug and adjusting screw.
-
Clamp the steering gear as illustrated.
1. Bracket VW 540/2
2. Thrust Piece 3253/6 (quantity: 2)
-
Remove thrust piece on steering pinion side. Refer to => [ Thrust Piece, Steering Pinion Side ] See: Steering/Steering Gear/Service and
Repair/Removal and Replacement/Thrust Piece, Steering Pinion Side.
-
Position the steering gear so it is in the straight position.
-
Disengage sensor wiring at steering gear housing.
-
Remove plug - arrow -.