A3 Quattro V6-3.2L (BUB) (2008)
Stabilizer Bar: Service and Repair
Front Suspension
Stabilizer Bar
Removing
Special tools, testers and auxiliary items required
‹› Locating Pins (T10096)
‹› Torque Wrench (VAG 1332)
‹› Engine/Transmission Jack (VAG 1383 A)
‹› Ball Joint Puller (3287 A)
-
Remove front wheels.
-
Remove nuts - arrows -and foot well trim.
-
Remove bolt - 1 - and the universal joint - 2 - from the steering gear.
-
Remove lower noise insulation.
-
Remove noise insulation if installed.
-
Remove diagonal brace if installed. Refer to => [ Diagonal Braces ] See: Subframe/Front Subframe/Service and Repair/Removal and