A3 Quattro V6-3.2L (BUB) (2008)
/Page-2301002.png)
-
Press out bonded rubber bushing.
Pressing In Bonded Rubber Bushing
-
Place trailing arm on a flat surface.
-
Position the trailing arm so dimension - A - (114 mm) is reached.
-
In this position, apply a vertical line (marking on the upper and lower edge of the bushing) that is centered with the trailing arm bushing.
There are 2 different bonded rubber bushings. For both, the marked line must lie between raised points - 1 - after pressing in.
-
Install tools as shown in the illustration.
