A3 Quattro V6-3.2L (BUB) (2008)
/Page-2370002.png)
9 - Ventilated brake disc
10 - Bolt
^
M16 x 1.5 x 70
^
Always replace after removal
^
Different versions, allocation
^
Hex head bolt = 200 Nm plus an additional 180 degree turn
^
Twelve-point bolt = 70 Nm plus an additional 90 degree turn
^
Before installing, threads in constant velocity joint should be cleaned with a tap.
Vehicle must be standing on ground when tightening
11 - Phillips head bolt 4 Nm
^
M6 x 16
12 - Wheel hub with wheel bearing
^
Sensor ring for ABS is installed in wheel hub
^
Various versions
13 - Wheel Bearing Housing
14 - Multi-point socket head bolt, 70 Nm plus an additional 90 degree turn
^
M12 x 1.5 x 45
^
Always replace after removal
15 - Drive axle
16 - Hex nut 70 Nm plus an additional 90 degree turn
^
Self-locking
^
Always replace after removal
