A3 Quattro V6-3.2L (BUB) (2008)
/Page-1375002.png)
Installing
Installation is in reverse order of removal. Pay attention to the following:
Torque specifications: => [ Seals and Flange Shafts ] See: Seals and Flange Shafts
-
Lightly oil outer circumference of new shaft seal.
-
Fill area between sealing lip and dust lip halfway with sealing grease (G 052 128).
-
Drive in new shaft seal as far as stop without tilting it.
-
Place lever on selector shaft.
