A3 Quattro V6-3.2L (BUB) (2008)
Shifter A/T: Procedures
Selector Mechanism Function Unit, Checking the Connectors
Selector Mechanism Function Unit, Checking the Connectors
Before servicing or inspecting the connectors, determine the cause of the fault via "Guided Fault Finding".
Before checking the connectors, check all control modules in the vehicle for fault entries and if necessary, repair the faults.
-
Checking harness connectors.
A 10-pin connector for connection wires from the selector mechanism function unit to the transmission (with CAN-Bus lines)
B 4-pin connector to Shift Lock Solenoid (N110) and Selector Lever Park Position Lock Switch (F319)
C 10-pin connector to selector mechanism cover