A3 Quattro V6-3.2L (BUB) (2008)
/Page-1402002.png)
-
Disconnect electrical harness connector at Mass Air Flow (MAF) Sensor (G70) - 1 -.
-
Unclip air intake nozzle - front arrows -.
-
Remove engine cover - rear arrows -.
-
Place selector lever in position "P".
-
Remove securing plate - C -.
-
Press retaining disc - A - upward and remove it.
-
Press off selector lever cable from lever/selector shaft in direction of - arrow - and set it on top.
-
Do not loosen bolt - B -.
‹› Take care not to bend or kink selector lever cable.
-
Raise vehicle.
Vehicles equipped with a TFSI engine:
