A3 Quattro V6-3.2L (BUB) (2008)
-
Coat O-rings -arrows- with transmission fluid.
-
Install oil pan.
-
Connect connector of Direct Shift Gearbox (DSG) Mechatronic J743 and engage retainer by turning.
-
Clean sealing surface between transmission fluid pump cover and transmission.
-
Set new transmission fluid pump cover -A- in place and tighten with new bolts -arrows - in a diagonal sequence to 8 Nm.
-
Heed appropriate instructions for work to be following battery connection.
-
Fill transmission fluid and check transmission fluid level.
-
Perform basic setting with the vehicle diagnosis, testing and information system VAS 5051B.
Tightening Specifications