A3 Quattro V6-3.2L (BUB) (2008)
/Page-1461002.png)
10 - Wheel speed sensor
11 - Bolt, 8 Nm
12 - Bonded rubber bushing
13 - Nut, 25 Nm
14 - Bolt, 4 Nm
15 - Brake disc
16 - Dust cap
^
Not installed on all wheel drive vehicles
17 - Bolt
^
Always replace after removal
^
Different versions, allocation
^
Hex head bolt 200 Nm plus an additional 180 degree turn
^
Loosening and tightening the hex bolt
^
Twelve-point bolt 70 Nm plus an additional 90 degree turn
^
Loosening and tightening the twelve-point bolt
^
Before installing, threads in constant velocity joint should be cleaned with a tap.
Vehicle must be standing on ground when tightening
18 - Wheel bearing unit
^
The ABS sensor ring is installed in the wheel bearing unit
^
The wheel bearing unit is maintenance free and has zero play. Adjusting and servicing is not possible!
19 - Bolt, 10 Nm
20 - Cover plate
