A3 Quattro V6-3.2L (BUB) (2008)
/Page-1471002.png)
-
Remove brake carrier and brake caliper and hang them on the body with wire.
‹› Do not allow brake caliper to hang from brake line.
-
Remove screw for brake disc and take out brake disc.
-
Remove the multipoint socket bolt with the socket AF 24 (T10361).
-
Remove wheel bearing unit from stub axle.
CAUTION.
‹› Avoid contaminating with dirt and damaging the seal when setting down/storing.
The wheel bearing - 1 - must always face up.
-
Always set the wheel bearing down on the wheel hub - 2 -.
Installing
