A3 Quattro V6-3.2L (BUB) (2008)
-
Remove plenum chamber cover - 2 - by carefully removing cover from retainer on windshield.
CAUTION!
Danger of damaging the paint.
‹› Protect the suspension strut dome from scratches with adhesive tape.
-
Turn the wiper arm linkage - 4 - until it is parallel to the body.
-
Disconnect the electrical connector - 5 -.
-
Remove the bolts - arrows -.
-
Pull the wiper frame with the linkage and wiper motor - 1 - far enough forward until the retaining pin - 2 - no longer is inside the mount - 3 -.
-
Remove the wiper frame with linkage and the wiper motor from the plenum chamber.
Installing