A3 Quattro V6-3.2L (BUB) (2008)
Install in reverse order of removal, observing the following:
-
Install the wiper frame - 1 - with linkage and the wiper motor into the plenum chamber; when doing this, the retaining pin - 3 - must fit into the
mount - 4 - on the body - arrow -.
-
Tighten the screws - 2 - and - 5 -.
-
Adjust wiper arms => [ Windshield Wiper Arms, Adjusting ] See: Wiper Arm/Adjustments/Windshield Wiper Arms, Adjusting.
Tightening Specifications