A3 Quattro V6-3.2L (BUB) (2008)
Wiper Arm: Service and Repair
Rear Window Wiper Arm
Rear Window Wiper Arm
Removing
-
Switch on ignition.
-
Activate the rear window wiper and allow the wiper arm to move to end position.
-
Switch off ignition and remove ignition key.
-
Carefully expand cap - arrows - and remove.
-
Carefully remove nozzle - 2 - from connecting pipe.
-
Loosen nut - 1 - a few turns.
-
Loosen wiper arm by tilting slightly from the wiper arm axle, remove the nut and then remove the wiper arm.
Installing
Install in reverse order of removal, observing the following:
-
Adjust wiper arm => [ Rear Window Wiper Arm, Adjusting ] See: Adjustments/Rear Window Wiper Arm, Adjusting.
Tightening Specifications