A3 Quattro V6-3.2L (CBRA) (2009)
‹› 23 Nm
8
Cross member for bumper
‹› Bumper cover removed before removing.
‹› Remove hex bolts - 7 - and remove cross member toward rear.
9
Bumper cover
‹› Tail lights removed.
‹› Bolting points => [ Rear Bumper Bolt Points ] See: Rear Bumper Bolt Points.
‹› Remove cap nuts (Qty. 2) from luggage compartment side using socket (T40078)=> See: Rear Bumper Bolt Points.
‹› Remove Torx bolt - 10 - and sheet metal screw - 11 -
‹› Remove the three sheet metal screws on left and right wheel housing liner and bolts from cover from underside.
‹› First pull bumper cover at top out of guide pieces - 1 - or - 2 -, then pry over wheel housing liner and remove toward rear.
10
Torx screw
‹› T25
‹› 2.5 Nm
11
Metal screw
‹› T25
‹› 2.5 Nm
12
Combination nuts
‹› 2 Nm
13
Bracket for spoiler
14
Torx screw
‹› 2 Nm