A3 Quattro V6-3.2L (CBRA) (2009)
‹› Unclip operating rod at casing from door lock.
‹› Unscrew multi-point bolts - 1 - and remove door lock.
7
Transfer Module
‹› Clipped into door handle
8
Inside door release mechanism release
‹› To install, first insert vertically into release lever, then swivel 90° and clip into door lock to secure => [ Inside Door Release Mechanism
Release ].
‹› After installing door lock, pull release through cover in direction of arrow.
‹› When installing, make sure cover is correctly seated in door shell, otherwise it will leak.
‹› Only use undamaged covers.
Door handle cover
1
Door handle cover
‹› Remove door trim.
‹› To remove, first unclip from door shell, then unclip from door handle mount and remove toward rear.
2
Actuating lever