A3 Quattro V6-3.2L (CBRA) (2009)
Front Door Panel: Service and Repair
Inside Door Release Mechanism
Inside Door Release Mechanism
Special tools, testers and auxiliary items required
‹› Trim removal wedge (3409)
Removing
-
Switch off ignition and remove ignition key.
-
Remove door trim.
-
Remove armrest.
-
Carefully loosen trim panel - 1 - from door trim - arrow - with Trim Removal Wedge (3409).
-
Disconnect electrical connector - 1 - on central locking switch.
-
Press central locking switch - 2 - out of inside door release mechanism - 3 -.
-
If present, disconnect electrical connector on door opener lighting bulb.
-
Remove bolts - arrows -.
-
Tilt inside door release mechanism out of door trim at rear side in upper area.