A3 Quattro V6-3.2L (CBRA) (2009)
/Page-1882001.png)
Rear Door Window Glass Weatherstrip: Service and Repair
Outer Window Shaft Strip
-
Door trim removed
-
Window frame and window regulator removed => [ Window Frame and Regulator ] See: Service and Repair.
-
Remove the strips from the door - 2 - in direction of - arrow - and remove the window shaft strip - 1 - from the door flange.
-
Press the window shaft strip flush on the door flange starting from the C-Pillar on the rear door edge.
-
Install the window shaft strip into the door.
