A3 Quattro V6-3.2L (CBRA) (2009)
Body Emblem: Service and Repair
Rear Lid Emblem
‹› Outer edges of rear lid are used as reference edges.
-
Warm vehicle and type designation to room temperature.
-
Bonding surfaces must be dry and free from dust and grease.
-
Clean outer panel with mineral spirits, treat with silicone remover and rub dry.
-
Pull off backing paper and press on characters - 1 -, maintaining pressure for approx. 3 seconds.
-
After gluing on, press on lettering further using an application roller.
Dimensional Data For Front-Wheel Drive Vehicles