A3 Quattro V6-3.2L (CBRA) (2009)
-
Now remove bolts for:
‹› Steering gear - 3 and 6 -
‹› Stabilizer bar - 11 and 16 -
‹› Subframe - 4, 5, 12 and 15 -.
-
Remove subframe.
Installing
Installation is in reverse order of removal, noting the following:
Tightening Specifications, refer to => [ Subframe, Diagonal Brace, Stabilizer, Transverse Link, Bracket and Level Control System Sensor Assembly
Overview ] See: Subframe, Diagonal Brace, Stabilizer, Transverse Link, Bracket and Level Control System Sensor Assembly Overview.
For wheel bearing housing and bearing unit tightening specifications, refer to => [ Wheel Bearing Housing and Bearing Unit Assembly Overview ]
See: Maintenance/Wheels and Tires/Wheel Bearing/Service and Repair/Removal and Replacement/Wheel Bearing Housing and Bearing Unit
Assembly Overview.
-
Install noise insulation.
-
Vehicle alignment is required. Refer to => [ Wheel Alignment is Necessary When: ] See: Maintenance/Alignment/Service Precautions.