A3 Quattro V6-3.2L (CBRA) (2009)
Front Subframe Mount: Testing and Inspection
Subframe Mount, Checking Adjustment
-
Check following dimensions at engine/right transmission mounting:
‹› Both bolts - 2 - must be parallel to edge of support arm - 3 -.
‹› A distance of - x - = 16 mm must be present between engine mount - 1 - and engine support - 4 -.
‹› Distance - x - = 16 mm can also be checked with a suitable cylindrical rod.
If dimension is too small or large, engine mount must be adjusted. Refer to => [ Subframe Mount, Adjusting ] See: Adjustments.