A3 Quattro V6-3.2L (CBRA) (2009)
-
Rear glass roof cut-out: close glass roof cut-out masking panel.
-
Let Pry Lever (80-200) slide along between mounting frame - 2 - for glass roof cut-out and headliner - 1 - until it locates one of the 15 clips.
-
Release clips - 3 - one after another with Pry Lever (80-200) as shown in illustration.
All:
‹› Headliner must not be kinked; kinked headliner must be replaced.
‹› 2 technicians are needed to disconnect the last connections and remove headliner.
-
If equipped, remove screw - arrow - in front interior light/reading light roof cut-out.
-
Release clips on rear clip - arrows -.