A3 Quattro V6-3.2L (CBRA) (2009)
/Page-1983003.png)
-
Remove glove compartment and remove inlay mat.
‹› There is a hole on the right side of the glove compartment in which the glove compartment cover pin is pressed.
‹› There is a cover cap - 1 - on the right outer side of the glove compartment. Make sure the cover cap is not lost when driving out the pin.
-
Drive out the pin on the right side - 1 - with a Punch 4 mm from inside toward outside.
-
Remove glove compartment cover.
Installing
