A3 Quattro V6-3.2L (CBRA) (2009)
Seat Back: Overhaul
Cover and Cushion For Divided Backrest, Left 1/3 Backrest
Cover and Cushion for Divided Backrest, Left 1/3 Backrest
1
Cover and Cushion
Removing
-
Remove the rear bench seat. Refer to => [ Rear Bench Seat ] See: Service and Repair/Removal and Replacement/Rear Seats.
-
Remove 1/3 backrest. Refer to => [ Left 1/3 and Right 2/3 Backrest without Center Armrest Component Overview ] See: Service and
Repair/Removal and Replacement/Rear Seats.
-
Remove the headrests. Refer to => [ Outer Headrests ] See: Service and Repair/Removal and Replacement/Rear Seats.
-
Lift latch trim - 5 - off.
-
Remove peripheral retaining strips - 7 -.
-
Pry cover over outer bearing - 6 - (Qty. 2).
-
Raise cover and upholstery - 1 -.
-
Press headrest guides - 2 - and - 3 - upward and out.
-
Remove cover and upholstery - 1 -.
Installing