A3 Quattro V6-3.2L (CBRA) (2009)
Seat Back: Overhaul
Right 2/3 Backrest Cover With Center Armrest, Removing and Installing
Right 2/3 Backrest Cover with Center Armrest, Removing and Installing
Removing
-
Remove 2/3 right backrest. Refer to => [ Left 1/3 or Right 2/3 Backrest ] See: Service and Repair/Removal and Replacement/Rear Seats.
-
Remove latch trim. Refer to => [ Latch Trim ] See: Service and Repair/Removal and Replacement/Rear Seats.
-
Remove seatbelt guide. Refer to => [ Seatbelt Guide ] See: Service and Repair/Removal and Replacement/Rear Seats.
-
Remove headrest guide. Refer to => [ Headrest Guide ] See: Service and Repair/Overhaul/Front Seat Covers and Cushion.
-
Pry out cover frame - 1 - with a screwdriver - 2 - - arrows -.
‹› The cover frame cannot be removed without destroying it.
-
Tip out backrest cover - 1 - and - 2 - at pass-through in - direction of arrow -.
-
On outer side of backrest, pry backrest cover - 3 - out of clamping guide with a screwdriver - 4 -.
-
Remove backrest bearing - 3 - in - direction of arrow -.