A3 Quattro V6-3.2L (CBRA) (2009)
-
Remove screws - 3 and 4 -.
-
Drill out pop rivet - 2 - with a dia. 6.0 mm drill in backrest frame mount - 1 -.
-
Tip backrest frame mount to side, remove actuating link bracket - 2 - at backrest frame mount - 3 -.
-
Disengage actuating link eye - 1 - at backrest lock release lever - 4 - by sliding eye forward - arrow - and removing.
-
Remove actuating link upward from backrest frame.
Installing
Installation is reverse of removal, but note the following:
-
Insert the bolts with locking compound.
-
Adjust backrest lock actuating link, refer to => [ Backrest Lock Actuating Link, Adjusting ] See: Description and Operation/Front Bucket Seat.