A3 Quattro V6-3.2L (CBRA) (2009)
-
Swing coolant pump forward.
Installing
Installation is in reverse order of removal, note the following:
‹› Replace O-ring.
-
Clean or smooth O-ring sealing surface.
-
Coat new O-ring with coolant additive G12+.
-
Insert coolant pump - 2 -.
-
Tighten bolts - 1 - of coolant pump.
-
Install belt pulley.
-
Install ribbed belt. Refer to => [ Ribbed Belt ] See: Engine/Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Service and Repair/Ribbed
Belt.
-
Fill with coolant => [ Filling ] See: Service and Repair.
-
Adjust the engine mounts. Refer to => [ Subframe Mount, Adjusting ] See: Body and Frame/Frame/Subframe/Front Subframe Mount/Adjustments.
Tightening Specifications