A3 Quattro V6-3.2L (CBRA) (2009)
‹› If a new funnel is used, next guide pistons with oil piston rings through funnel twice and remove resulting metal shavings if necessary. Only then
install piston with piston rings.
-
Push piston by hand into oiled piston installation tool.
‹› Flat side of piston crown must face toward funnel pin - arrow -.
-
Hold funnel (with piston inserted) on upper edge and press piston in with both thumbs.
-
Push piston in until it protrudes approximately 15 mm from lower edge of funnel.
-
Insert piston into appropriate cylinder bore.
‹› Funnel pin - arrow - must point toward center of cylinder block.
-
Press funnel tightly against cylinder block and push piston in.