A3 Quattro V6-3.2L (CBRA) (2009)
-
Lightly coat the lower sealing surface of the sealing flange with sealant - shaded area -.
-
Apply a thin bead of sealant - arrow - to the clean sealing surface of the sealing flange, as shown in the illustration.
‹› Thickness of sealant bead - arrow -: 2 to 3 mm.
‹› The sealant bead may not be thicker than 3 mm, otherwise excess sealant could enter the oil pan and clog the oil intake tube.
‹› The sealing flange must be installed within 5 minutes of being applied with sealant.
Vehicles through 11.2004: