A3 Quattro V6-3.2L (CBRA) (2009)
/Page-466010.png)
-
Remove bolts - 1 to 5 - and remove accessory assembly bracket.
-
Pull after-run coolant pump (V51), with coolant hoses connected, downward out of rubber loops of retainer. Spray rubber loops with silicon-free
lubricant if necessary.
‹› Coolant pump remains on the engine with coolant hoses connected.
-
Disengage for engine speed (RPM) sensor (G28) connector - arrow - from bracket on oil dipstick guide tube.
-
Remove bolt - 3 - and remove oil dipstick guide tube - 2 -.
