A3 Quattro V6-32L (CBRA) (2009) - Ribbed Belt Pulley Removal & Installation
Idler Pulley: Testing and Inspection
Ribbed Belt Pulley With Freewheel, Removing and Installing
Ribbed Belt Pulley with Freewheel, Removing and Installing
Special tools, testers and auxiliary items required
‹› Multi-point adapter (3400)
‹› 8 mm hex socket or TORX T50
Removing
-
Remove generator => Electrical Equipment 27 Generator.
-
If present, press the protective cap off the generator pulley.
-
Counter pulley with Multi-Tooth Adapter (3400 ) and turn generator shaft clockwise to loosen.