A3 Quattro V6-3.2L (CBRA) (2009)
-
Replace O-rings and oil filter insert.
Note:
-
Observe waste disposal regulations!
-
Tighten cap with Socket AF 36 .
-
Install oil drain plug with new gasket.
-
Fill with engine oil.
Tightening Specifications
Oil drain plug .......................................................................................................................................................................................................... 30 Nm
Cover ....................................................................................................................................................................................................................... 25 Nm
CR TDI engines:
-
To drain oil, remove noise insulation on drain plug. See: Body and Frame/Sound Proofing / Insulation/Service and Repair
-
Remove the vacuum shut-off valve -1- from its retainer and move it to the side.