A3 Quattro V6-3.2L (CBRA) (2009)
Condenser HVAC: Service and Repair
Condenser
Condenser
‹› Condenser is available in different versions, depending on version of vehicle.
‹› The radiator and condenser may have small indentations on the fins even when installed correctly. It is not damage. Do not replace the radiator or
condenser because of those small indentations.
Removing
-
Drain the refrigerant circuit: Refrigerant R134a - Servicing
-
Disconnect refrigerant lines from condenser. Refer to => [ Refrigerant Lines, Disconnecting from Condenser ]. See: Hose/Line HVAC/Service and
Repair/A/C Compressor Refrigerant Lines
The following additional work may be necessary to remove condenser, depending on engine version:
‹› Disengage front end module from longitudinal member and pull forward approximately 10 cm (for example, in vehicles with 2.0L gasoline
engine), then proceed as follows:
-
Disengage bracket for refrigerant lines on right longitudinal member - arrow -.
-
Protect front corners of both fenders from damage, for example, with adhesive tape - 1 -.