A3 Quattro V6-3.2L (CBRA) (2009)
Control Assembly: Service and Repair
Heater and A/C System Control Base Plate
Heater and A/C System Control Base Plate
‹› Base plate - C - is different between vehicles without A/C system (with a control for Bowden cable to temperature door - E -) and with manually
regulated A/C system (without a Bowden cable control - E -, the temperature door is moved by a control motor).
‹› A step-up gear for operating the flexible shaft - H - (for air distribution) is installed in base plate - C -. The flexible shaft - H - rotates 2 times for
one switch rotation via the step-up gear on heater / on heating & A/C unit and on base plate of heater / A/C system controls - C -. Refer to=> [
Heater and A/C System Control Base Plate ] See: .
Removing
-
Bring rotary switch for temperature preselect - A - into position "cold stop" (only on vehicles without A/C system).
-
Remove the glove compartment. Refer to=> See: Body and Frame/Interior Moulding / Trim/Utility Storage Compartment/Service and
Repair/Storage Compartments and Covers/Glove Compartment