A3 Quattro V6-3.2L (CBRA) (2009)
Control Assembly: Service and Repair
Comfort System Central Control Module
Comfort System Central Control Module
Special tools, testers and auxiliary items required
‹› Pry lever (80-200)
Removing
Component location: in the back of the luggage compartment on the right side under the side trim.
-
If the control module was replaced, select the "Replace" function for the respective control module in "Guided Fault Finding" or " Guided
Functions".
-
Select the function or path:
-
Follow further instructions on display of (VAS 5051B).
‹› All cable ties opened or cut during engine removal must be reinstalled at the same locations during installation.
-
Remove luggage compartment right side trim => Body
Interior 70 Removal and Installation.
-
Disconnect electrical connectors - 2 to 6 -.
-
Release the retaining clips in - direction of arrow A - and remove the connector in - direction of arrow B -.
-
Remove the nuts - 1 -, - 7 - and - 8 - and remove the retaining plate and control module.