A3 Quattro V6-3.2L (CBRA) (2009)
Discharge Air Temperature Sensor / Switch: Service and Repair
Left Vent Temperature Sensor
Left Vent Temperature Sensor
‹› Not installed on vehicles with manually regulated A/C system
Removing
-
Switch off ignition.
-
Remove the driver side storage compartment.
-
Disconnect harness connector - A - from temperature sensor.
-
Turn temperature sensor - B - approximately 90°.
-
Remove temperature sensor - B - from air guide.
Installing
-
Install in reverse order of removal.
-
Check seal - C - for proper seating when installing.