A3 Quattro V6-3.2L (CBRA) (2009)
Door Lamp: Service and Repair
Door Opener Illumination Bulb
Door Opener Illumination Bulb
Removing
-
Remove relevant door trim.
-
Remove insulation mat in upper area from door trim.
-
Remove the bulb - 2 - from the socket on the door release.
-
Disconnect electrical harness connector - 1 - from socket.
Installing
Install in reverse order of removal, noting the following:
-
Connect electrical connector.
-
Insert light bulb for door opener lamp into opening and engage.
-
Install door trim.