A3 Quattro V6-3.2L (CBRA) (2009)
Horn: Service and Repair
Signal Horns, From 06.2008
Signal Horns, from 06.2008
Observe notes on contact corrosion => [ Contact Corrosion ] See: Powertrain Management/Computers and Control Systems/Information Bus/Service
Precautions.
Removing
-
Reach into the opening - arrow A - remove the lower air inlet grille - 1 - from the bumper - arrow B -.
-
Remove the nut - 5 -.
-
Remove the low tone horn (H7) - item 3 - and disconnect the connector - 4 -.
-
Disconnect the electrical connector - 6 -.