A3 Quattro V6-32L (CBRA) (2009) Turn Signal Lamp Component Information TSB
Install in reverse order of removal, observing the following:
‹› The entire exterior mirror turn signal must be replaced if an LED is faulty.
-
Insert the tip of the turn signal in the slit in the exterior rearview mirror housing - 3 - - arrow A -.
-
Tilt the turn signal bulb housing - 4 - into the exterior rearview mirror housing - arrow B -. The locking tab - 2 - must engage in the mount - 1 -.
-
Install the exterior rearview mirror housing => Body
Exterior 66 Removal and Installation.
-
Attach mirror glass at mirror adjusting unit and press on mirror glass.
‹› Only press on the center of the mirror.
Tightening Specifications